Heavy haul brokers: what they handle and how carriers work with them
By Rafael Fox · Updated October 2026
Heavy haul brokers work the hardest freight on the road to plan: a load that's too wide, too tall, too long or too heavy to move without permission. Federal rules set the standard width on the National Network at 102 inches and the federal gross weight limit on the Interstate at 80,000 pounds . Loads that can't be broken down to fit move on state permits, and every extra requirement adds a link to the chain. This guide explains that chain, what heavy haul brokers ask of carriers, and how to find and check them.
A note on our role: we don't dispatch oversize or heavy haul loads. We dispatch legal-size flatbed and step deck, among other equipment. This page is information for carriers and readers who want to understand the heavy haul freight broker side.
The heavy haul chain
A normal load has three links: shipper, broker, carrier. A permitted load has more, and the broker coordinates all of them.
Link 1
Shipper
Equipment dealer, contractor or manufacturer with a load that's too wide, tall, long or heavy for normal limits.
Link 2
Heavy haul broker
Quotes the move, picks the trailer type, and coordinates the extra links below.
Link 3
Route survey
For the biggest loads, someone drives the route to check bridges, wires, turns and clearances.
Link 4
State permits
Each state on the route issues its own oversize or overweight permit, with its own routes, hours and rules.
Link 5
Escorts
Pilot cars and sometimes police escorts, when a state's permit rules require them for the size.
Link 6
Carrier
Hauls on the permitted route and times, secures the load, and signs the rate con in its own name.
The permit links are where heavy haul differs most. Each state sets its own permit rules: which routes are allowed, travel hours, whether weekends and holidays are off limits, when escorts are needed and how many, and what flags, signs and lights the load must carry. A load crossing four states may need four permits with four sets of conditions, and the carrier must follow every one. A good heavy haul broker knows those rules or works with a permit service that does, and builds the timeline around them.
Trailers matter too. Heavy equipment hauling brokers match the load to removable gooseneck trailers, multi-axle lowboys, stretch decks, or specialized rigs for the heaviest moves. The trailer choice drives the permits, because axle count and spacing determine how much weight each axle carries. Our truck weight limit checker shows how axle weights work under the federal limits.
How heavy haul loads are priced
Heavy haul rates aren't a simple rate per mile. A quote usually separates the line haul from the pass-through costs: permits for each state, escort vehicles by the mile or the day, route surveys, police escorts where required, and sometimes utility crews to lift wires on a tall load. Time drives cost as much as distance, because permit hours can stretch a 500-mile trip over several days. The trailer matters too: a multi-axle rig that spreads a heavy load costs more to run and is scarcer than a standard step deck. When you compare two heavy haul offers, compare the line haul and each pass-through cost separately, and check which of them you're expected to pay up front.
Where heavy haul moves go wrong
The common failures are predictable. Measurements that were wrong by a few inches, so the permit doesn't match the load. A permit that arrives late, leaving the truck waiting at the shipper. An escort that doesn't show. A route with a low bridge or a tight turn nobody checked. A load that's ready a day later than promised. Good heavy haul brokers plan for each one and put the cost of delay in writing before the truck is dispatched.
What heavy haul brokers ask carriers
Expect a deeper setup than for dry van freight. Heavy haul load brokers are trusting you with equipment that can be worth more than your truck, on routes with no room for error.
| Item | Why they ask |
|---|---|
| Trailer list with deck heights, lengths and axle counts | To match the load and plan permits |
| Cargo insurance limits, often above standard | Equipment values can exceed a typical policy |
| Securement equipment: chains, binders, edge protection | Heavy loads need more and heavier tie-downs |
| Experience with permitted loads and named states | Permit conditions vary and mistakes are costly |
| Safety record and inspection history | Oversize moves draw more roadside attention |
| Who orders permits and escorts, and how costs are paid | Avoids disputes after delivery |
Ask your own questions in return. Who is ordering each permit, and when will you see it? Who pays the escorts, and are they booked? What happens if a permit is delayed or a state closes a route? Is there a layover or detention rate if the load sits waiting for an escort or a permit window? How is a tarp, a load-out delay, or a second attempt at loading paid? Get the answers on the rate con, not in a phone call.
EXAMPLE: one wide load
EXAMPLE: Broker A offers Carrier B a 12-foot-wide excavator on a removable gooseneck across three states. The rate con lists the line haul, says Broker A orders and pays for permits and escorts, and pays a set daily layover if a permit isn't ready on the planned day. The first state's permit limits travel to daylight hours on weekdays, so the trip takes an extra day. Because the layover and permit terms were written down, the extra day is paid instead of argued about.
Finding heavy haul brokers from published sources
We don't rank or recommend named brokers. Industry rankings by revenue and trade association directories can tell you who operates in heavy haul, but not who pays well or plans well. Date-check any list you use and look at how it was built; some are paid placements. Our guide to top freight broker companies explains how to read them, and freight broker niches covers why heavy haul is its own specialty.
Whatever source brings you a broker, check it the same way: active broker authority and a bond or trust on file in FMCSA's public record, contact details that match the record, and clear written terms for permits, escorts and layovers. Ask carriers you know who run open deck freight. Start with one load before you commit more.
Watch how a broker handles the first quote. One that asks for the load's exact dimensions and weight, the trailer you'll use, and your experience in each state on the route is planning the move. One that only asks for your rate and wants you rolling tomorrow may be planning to leave the permits to you without saying so. The questions a broker asks before booking tell you a lot about how the trip will go.
If your loads stay within legal limits, our flatbed dispatch works flatbed and step deck freight: we find and negotiate the load, check the broker, and you confirm or pass. The broker sends you the rate con and pays you directly. Apply here if that fits your truck.