TraceDispatch

LTL brokers: how LTL brokerage works and what carriers should know

By Rafael Fox · Updated October 2026

QUICK ANSWER
LTL brokers book small shipments, usually a few pallets, with less-than-truckload carriers that move many shippers' freight through terminals. They earn a margin between the discounted rates they've negotiated with carriers and what they charge shippers. Pricing runs on freight class, weight and distance, so accurate measurements matter. Small carriers mostly meet them on partial loads.

LTL brokers sit in a different corner of freight from most truckload brokers. A truckload broker matches one shipment with one truck. An LTL broker places small shipments into networks run by large carriers, where a single trailer may carry freight for twenty shippers. The paperwork, pricing and problems are different, and so is the role carriers play. This guide explains how LTL brokerage works, how to read the published lists of LTL and freight brokers, and where small carriers fit in.

How LTL brokerage works

Three ways to move freight by truck, side by side. The line between them blurs at the edges, but the pricing and handling are distinct.

LTL

Size
Usually 1 to 6 pallets
Price
Carrier tariff by class, weight and distance, less a discount
Route
Pickup, origin terminal, linehaul, destination terminal, delivery
Who hauls it
Large LTL carriers with terminal networks

Partial (volume)

Size
Often about 6 to 20 pallets, part of a trailer
Price
Negotiated, by distance and space used
Route
Direct, sometimes sharing the truck with one or two other partials
Who hauls it
Truckload carriers, including small carriers with 26 ft box trucks and vans

Full truckload

Size
The whole trailer, or its weight limit
Price
Negotiated, mostly per mile for the lane
Route
Direct from pickup to delivery
Who hauls it
Truckload carriers of every size

An LTL carrier publishes a tariff: base rates by origin, destination, weight bracket and freight class. Almost nobody pays the base rate. Shippers and brokers negotiate a discount off the tariff, plus a minimum charge and a fuel surcharge. A broker with large combined volume can often get deeper discounts than a small shipper could alone, and that gap is where the LTL broker earns its money. Some LTL brokers also charge a per-shipment fee, or add accessorial charges such as liftgate, residential delivery or inside delivery.

Who uses LTL brokers? Mostly small and mid-size shippers without a logistics team, ecommerce sellers moving pallets to warehouses, and companies that want one invoice and one contact instead of accounts with several carriers. Many larger brokers and 3PLs run LTL desks alongside truckload; our guide to freight broker vs 3PL explains how those roles overlap.

Legally, an LTL broker is a property broker like any other. It needs FMCSA broker authority and $75,000 of security on file , and the LTL carrier it books is the one that holds the freight and is responsible for it under its own bill of lading terms.

Freight class and density

LTL pricing depends on freight class, which comes from the National Motor Freight Classification published by NMFTA. After the 2025 NMFC changes, density plays a larger role in setting class, so accurate measurements matter more than ever . Density is weight divided by cubic feet. Dense freight that takes little space usually gets a lower class and a lower price per pound; light, bulky freight gets a higher class.

EXAMPLE: a shipment of 4 pallets, each 48 by 40 by 50 inches, weighing 2,400 lb in total. Each pallet is 96,000 cubic inches, or about 55.6 cubic feet, so the shipment is about 222 cubic feet. 2,400 divided by 222 is about 10.8 pounds per cubic foot. The class for that density comes from the current NMFC, not from this page; we don't reproduce the tables because they change and some items have their own rules.

When a carrier measures freight on its dock and gets a different density or description than the bill of lading shows, it can reclass or reweigh the shipment and bill the difference. Handling those disputes is a big part of what a good LTL broker does. To compare LTL quotes on a per-pound or per-hundredweight basis, use the freight rate per cwt and per pound calculator.

Best LTL freight brokers: reading published lists

We don't rank brokers, LTL or otherwise. Searches for the best LTL freight brokers usually land on two kinds of lists: industry rankings by revenue, such as those published each year by trade outlets, and paid or affiliate lists. A revenue ranking tells you who is large, not who is good for your freight. An affiliate list may rank whoever pays. Check the date, the method and whether the publisher earns money from the companies listed.

Whatever list you start from, check each broker yourself: active broker authority and bond on file in FMCSA's public record, the LTL carriers it actually uses, how it handles reclass and damage claims, and how it bills accessorials. The same approach applies to truckload brokers; our guide to top freight broker companies explains where those lists come from, and bulk freight brokers covers another specialized corner.

Questions to ask an LTL broker before you ship
QuestionWhy it matters
Which LTL carriers will move this shipment?Service and claims history differ by carrier and lane
Is the quote all-in, with fuel and accessorials?Liftgate, residential and limited-access fees add up
How do you handle a reclass or reweigh?Inspection charges are common when measurements are off
Who files a damage claim, and how fast?Claims go to the carrier; the broker should help

For carriers: where partials fit

True LTL runs through terminal networks, so small carriers rarely haul it directly. Where small carriers do meet LTL and volume brokers is the partial load: freight too big for LTL pricing to make sense, but not enough to fill a trailer. A shipper with 12 pallets might pay far less for a direct partial than for LTL with several terminal stops, and the freight isn't rehandled.

That's good freight for a 26 ft box truck, which fits roughly 12 standard pallets on the floor, and for dry vans that can combine two or three partials heading the same way. A few things to check on a partial load: the pallet count and dimensions in writing, whether the freight can be stacked, whether other freight will share the trailer, and how the rate compares per mile with a full load on the same lane. Liftgate and appointment needs are common on partials going to businesses without docks.

EXAMPLE: judging a partial

EXAMPLE: Broker A offers Carrier B, running a 53 ft dry van, a 10-pallet partial for $900 on a 450-mile lane, about $2.00 a mile. On its own that may look thin next to a full load. But if Carrier B can add a second partial picking up nearby and delivering on the way, the two together might pay more than one full load, with two pickups and two deliveries to plan around. The questions are time and certainty: will both shippers have the freight ready, will the second delivery appointment fit the first, and will the combined weight stay legal. A partial that leaves half the trailer empty for 450 miles only works if the rate reflects that.

Partials also carry more paperwork risk. Make sure the rate con lists the exact pallet count and weight, says whether the load is exclusive or shared, and states any liftgate or appointment requirement. If the shipper hands over more freight than the rate con shows, call the broker before you load it.

Our box truck dispatch works with trucks 26 ft and longer, and we dispatch dry vans and the other equipment we list. We find and negotiate full and partial loads with brokers, check each broker's public record, and send you the details; you confirm or pass, the broker sends you the rate con, and the broker pays you directly. If that fits, apply here.

LTL brokers: common questions

What is an LTL broker?
An LTL broker arranges less-than-truckload shipments, usually a few pallets, with LTL carriers that combine freight from many shippers in one trailer and move it through terminals. The broker compares carrier prices for the shipment, books it, and handles billing and problems such as reclassification. It needs the same FMCSA broker authority and $75,000 bond as any property broker.
How do LTL brokers make money?
Most LTL brokers buy capacity at discounted rates they've negotiated with LTL carriers, often because of the volume they bring, and sell it to shippers at a higher rate. The difference is their margin. Some charge a fee per shipment instead. Shippers benefit when the broker's discount beats what they could get on their own volume.
Do LTL brokers work with small carriers?
Mostly not for true LTL, which runs through large carriers with terminal networks. Small carriers meet LTL brokers on partial and volume loads, where a shipment is too big for LTL pricing but too small to fill a trailer. A 26 ft box truck or a van with room can haul partials booked directly, without terminals.
What is the difference between LTL and partial loads?
LTL freight is priced by class, weight and distance from a carrier's tariff, and it's handled through terminals with other shippers' freight. A partial, or volume load, is priced more like a truckload by distance and the space it takes, rides with fewer stops, and usually isn't rehandled. Partials typically fill a good share of a trailer but not all of it.

Run a 26 ft box truck or a van with room to fill?

We dispatch for carriers only: we find and negotiate full and partial loads with brokers, you confirm each one, and the broker pays you directly.

ONE LOAD, START TO PAYDAYEXAMPLE
  1. Rate con, sent to you$2,150
  2. Pickup, delivery, POD
  3. Broker pays you$2,150
  4. Our fee (5%)-$107.50
  5. You keep$2,042.50