TraceDispatch

How do freight brokers find loads? Shippers, bids and boards

By Rafael Fox · Updated October 2026

QUICK ANSWER
Freight brokers find loads from shippers: through sales and referrals, contract bids (RFPs) that lock in lane rates for months, spot requests when a shipper needs a truck fast, shipper bid portals, and sometimes other licensed brokers. Load boards are mostly where brokers find trucks for that freight. That's why one shipper's load can reach a carrier through several brokers.

How do freight brokers find loads? Not on load boards, mostly. A broker's freight starts with a shipper that trusts it to move product, and every load a broker posts was won somewhere else first. Understanding where that happens helps two kinds of readers: people learning the brokerage business, and carriers trying to figure out why the same load shows up three times at three different rates. We sit on the carrier side as a dispatch service, so we see the end of this chain every day.

Where freight broker loads come from

Four main sources feed a broker's freight. Each one arrives differently, carries a different price, and reaches carriers in a different way.

Load sources feeding one broker
  • Contract RFP

    A shipper bids out its lanes for months at a time. Steady volume, fixed rates.

  • Spot request

    A shipper needs a truck today or tomorrow. Priced on the day.

  • Bid platform

    A shipper portal or marketplace where approved brokers price posted loads.

  • Co-broker

    Another licensed broker passes a load on, openly and with authority.

Broker

Prices the load, then covers it: own carriers first, then emails, apps and load boards

Carrier

Gets the offer, negotiates, signs the rate con

The fourth source deserves a note. Co-brokered loads come from another licensed broker that has more freight than it can cover, or a shipper relationship in a region where it has few carriers. When it's done openly, between two brokers with authority and bonds on file, and the shipper's contract allows it, it's ordinary business. When it's hidden, it's something else, which we cover below. Agents add another layer: many loads are found by independent freight agents working under a brokerage's authority, who bring their own shipper relationships and book the freight through that brokerage.

Behind all four sits the slow work of winning shippers: cold calls, referrals, trade shows, and a reputation for covering hard loads. Our guide on how to find shippers as a freight broker covers that side. If you're starting out, read how to become a freight broker first; a broker with no shippers has no loads to find.

RFPs and freight bidding sites for brokers

Larger shippers buy most of their trucking through contract bids. Once or twice a year, a shipper sends a request for proposal listing its lanes, expected volume, equipment and service rules. Brokers and carriers price each lane, and the shipper awards lanes for a set period, often a year. The winner gets a primary position on those lanes: the first look at each load, at the agreed rate.

Where do brokers bid on freight? Increasingly inside software. Many shippers run RFPs and daily tenders through a transportation management system or a bid platform, where approved vendors see posted loads and submit prices. To get in, a broker usually has to pass a vendor setup: authority and bond on file, insurance certificates, references and sometimes a credit check. Open freight marketplaces exist too, where shippers post loads and brokers bid. Some are useful; some charge brokers for access to freight that barely exists. Before paying for any of them, ask which shippers actually post and how often loads are awarded.

Contract and spot freight compared
Contract (RFP)Spot
How it's wonBid on lanes for monthsPriced load by load
RateFixed for the contract termSet by that day's market
Risk for the brokerMarket rises and carriers cost more than the bidShipper shops each load to several brokers
What carriers seeSteady repeat lanes, often offered directlyUrgent loads, often on boards

How a broker prices a bid

A broker bidding on a lane is betting on what trucks will cost over the contract term. It looks at what it paid carriers on that lane recently, the season, how balanced the lane is (whether trucks can find freight back out), the shipper's loading times and appointment rules, and how many loads a week are really likely to come. Then it adds a margin. Bid too high and it loses the lane; bid too low and every load becomes a fight to cover. Shippers often award a lane to two or three providers and route each load to the primary first, then the backups if the primary rejects it.

Contract freight has a catch that carriers feel. If a broker bid low months ago and the market has since risen, it may struggle to cover loads at a rate carriers will accept. That's when a contract load turns up on a board with a broker pushing hard for a truck.

Spot freight and load boards

Spot freight is everything outside the contract: a surge of orders, a contract carrier that fell through, a one-time move. A shipper emails or calls a few brokers it trusts, takes the best mix of price and reliability, and the winning broker has hours to cover it.

This is where load boards come in, and why the question how to find loads as a freight broker is slightly misleading. Brokers mostly use boards to find trucks, not freight. A broker covers a load in rough order: its own trusted carriers, then carriers who've run that lane before, then email lists, texts and its own carrier app, and only then a public load board. Posting is fast and wide but brings unknown carriers, so it means more vetting. How boards work from the broker side is covered in load boards for freight brokers.

For carriers, that order explains a lot. The best repeat freight is often never posted, because it's gone to carriers the broker already knows. Being one of those carriers, with clean paperwork and on-time service, is worth more than refreshing a board.

EXAMPLE: one spot load's day

EXAMPLE: At 9 a.m., Shipper C emails three brokers asking for a truck tomorrow on a 600-mile dry van lane. Broker A quotes first and wins at 10. Broker A texts two carriers that ran the lane last month; neither has a truck. At 11 it emails its carrier list. At noon, with no takers, it posts the load on a board. By then Broker B, which lost the quote, may still have its own post up looking for a truck in case Shipper C comes back. Carriers searching that lane now see the load from two brokers, at two rates, for one actual shipment.

Why carriers see the same load twice

Duplicate posts are normal and usually innocent. They happen when a shipper sends the same load to several brokers at once, when a losing broker's post stays up, when a contract carrier and a spot broker both chase the same order, or when one broker posts on more than one board. Rates differ because each broker has its own deal with the shipper and its own margin.

The innocent cases have a cousin that isn't. A load posted by a company that didn't win it from the shipper, or by a carrier trying to re-broker a load it accepted, is the start of double brokering. Signs and checks are in double brokering freight. A simple rule helps: when you see two posts for what looks like the same load, book with the broker whose authority and contact details check out, and confirm the pickup number with the shipper if anything looks off.

Two rates for one load are also useful information. Run each through the rate per mile calculator with your real miles, including deadhead, and you have a quick read on what the lane is paying that day. If boards keep coming up empty for your truck, our page on what to do when you can't find freight covers the options. We work boards and broker relationships for carriers; you confirm each load, the broker sends you the rate con, and the broker pays you directly. Apply here if that helps.

How do freight brokers find loads: common questions

How do freight brokers get loads?
From shippers. Brokers win freight through sales calls and referrals, contract bids called RFPs that set lane rates for months, spot requests when a shipper needs a truck fast, and shipper bid portals. Some also take loads from other licensed brokers. Load boards are mostly where brokers find trucks for that freight, not where they find the freight itself.
Where do brokers bid on freight?
Mostly inside shippers' own procurement processes: annual or quarterly RFPs sent as spreadsheets or run through bid software, and portals where a shipper posts loads and approved brokers and carriers submit prices. Large shippers often use a transportation management system with a built-in tender or bid feature. Brokers must usually be approved as a vendor before they can bid.
What are freight bidding sites?
They're platforms where shippers post shipments and approved brokers or carriers bid to haul them, either for single spot loads or for contract lanes. Some are run by shippers or their software providers, others are open marketplaces. Treat any site that charges brokers to see loads with care, and check that its shippers are real before you invest time.
Do brokers post every load on load boards?
No. Many loads go to carriers the broker already knows, through direct emails, texts, its own carrier app, or a preferred-carrier list, before anything is posted. Boards are used when those routes don't cover the load, or to find new carriers on a lane. The harder a load is to cover, the more likely you'll see it on a board.

Tired of chasing the same load on five boards?

We dispatch for carriers only. We work the brokers and boards for your truck, negotiate, check each broker's records, and you confirm every load.